AYPOTech.com

New Jersey Water Operator Continuing Education

The courses here at AYPO Tech provide valuable information that will help water operators in New Jersey to be more effective and successful. The available courses are approved by the State to provide the hours of education water operators need to renew their licenses. Once you complete the course, you will receive a certificate of completion, and we will report your hours to the state within 5 business days. Rush reporting available.

$299 TOP SELLER

NJ 36-Hour Package for New Jersey Operators

clock hour icon 36h course

Save with this 36-hour package for water operators in New Jersey! This package contains courses approved by the Department of Environmental Protection and provides the hours of education water operators need to renew their licenses.

Includes:

  • Advanced Oxidation & UV Disinfection
  • Membrane Processes
  • Basic Electrical Concepts For Water Operators
  • Piping Systems Part 1
  • Piping Systems Part 2
  • Pump Installation and Maintenance
  • Electrical Safety (NFPA 70E 2021)
  • Valve Maintenance and Piping System Protection
  • Pumps Part 1
  • Pumps Part 2
  • Introduction to Water Technology
  • Fluid Mechanics
$155

NJ 18-Hour Package for New Jersey Operators

clock hour icon 18h course

Save with this 18-hour package for water operators in New Jersey! This package contains courses approved by the Department of Environmental Protection and provides the hours of education water operators need to renew their licenses.

Includes:

  • Pumps Part 1
  • Pumps Part 2
  • Introduction to Water Technology
  • Valve Maintenance and Piping System Protection
  • Pump Installation and Maintenance
$59

NJ Introduction to Water Technology

clock hour icon 5h course

This course introduces operators to the hydrologic cycle and its effects on the structure and functions of water and wastewater systems. From there, we discuss water collection, treatment, and distribution, as well as the physical, chemical, and biological properties of water.

$59

NJ Wastewater Treatment Processes

clock hour icon 5h course

This course provides an overview of wastewater treatment, including the physical separation of solids, chemical treatment processes, biological processes, and solids treatment and disposal.

$59

NJ Electrical Safety (NFPA 70E 2021)

clock hour icon 5h course

This course equips electricians and other workers exposed to electrical hazards with knowledge needed to apply safety requirements from the NFPA 70E. We start by detailing the arrangement, scope, and purpose of the document, as well as define common terms. Then, we discuss securing an electrically safe work condition, lockout/tagout, energized work, grounding electrical equipment, arc flash and more. In summary, we clarify NFPA 70E safety practices used in the electrical industry. This course has no prerequisites.

$59

NJ Maintaining Wastewater Equipment

clock hour icon 5h course

This course provides details on a variety of wastewater equipment, including pumping stations, screening equipment, grinding equipment, grit removal systems, sludge and scum collection apparatus, and flow measurement devices. For each piece of equipment, we will cover major parts, start-up, operation, shutdown, maintenance, and safety.

$40

NJ Water Distribution System Operation Overview - 4 Hours

clock hour icon 4h course

Water Distribution System Operation Overview is a course designed to give an overview to water treatment and distribution operators of water distribution components. Including: Pipeline operations, Meters, Valves, Hydrants, Pumps and Motors, Groundwater wells, EPA Groundwater rules and Water Quality issues in a distribution system.

4.7 19 Reviews
$35

NJ Pump Installation and Maintenance

clock hour icon 3.50h course

This course introduces operators to pumping systems, hydraulics, basic pumping terminology, and pump curves. We will also look at a number of pump types, including end-suction centrifugal pumps, propeller pumps, turbine pumps, and rotary pumps. For each pump type, we’ll discuss internal parts, construction, and operation. This course has no prerequisites.

$35

NJ Piping Systems: Part 1

clock hour icon 3.50h course

This course introduces operators to piping systems and familiarizes them with the larger components that make piping systems function, including metallic and nonmetallic piping, tubing, and hoses.

$35

NJ Valve Maintenance and Piping System Protection

clock hour icon 3.50h course

Covers maintenance and operation of gate, globe, ball, plug, check, and special-purpose valves. Details actuators and various accessories. Explains valve selection based on application. Describes methods of protecting piping systems. This course has no prerequisites

$35

NJ Piping Systems: Part 2

clock hour icon 3.50h course

This course dives further into piping systems by discussing the smaller components that make piping systems function, including fittings, common and special valves, strainers, filters, traps, and accessories. Preventative and repair maintenance for these components are also discussed.

$30

NJ Pumps: Part 2

clock hour icon 3h course

This course continues looking at additional pump types, including reciprocating pumps, metering pumps, and special purpose pumps. For each pump type, we will discuss internal parts, construction, and operation. We also discuss sealing devices, including packing and mechanical seals, bearings, lubrication, and installation.

$30

NJ Pumps: Part 1

clock hour icon 3h course

This course introduces operators to pumping systems, hydraulics, basic pumping terminology, and pump curves. We will also look at a number of pump types, including end-suction centrifugal pumps, propeller pumps, turbine pumps, and rotary pumps. For each pump type, we will discuss internal parts, construction, and operation.

$25

NJ Pipelines - 2.5 Hours

clock hour icon 2.50h course

Pipelines is a course that focuses on the all the components of the pipelines that deliver water, including: pipes, meters, valves, hydrants, pumps and motors, horsepower and SCADA systems. It also covers the EPA groundwater rules and distribution system water quality issues.

4.8 10 Reviews
$25

NJ Pumps and Motors - 2.5 Hours

clock hour icon 2.50h course

Pumps and Motors is a course that details the types, components of and the proper maintenance steps for water pumps and the motors that drive them.

4.8 21 Reviews
$20

NJ Corrosion Control - 2 Hours

clock hour icon 2h course

Corrosion Control is a course that focuses on the importance of producing a properly balanced as well as various types of corrosion control methods for the protection of distribution systems.

4.9 8 Reviews
$20

NJ Membrane Processes - 1.5 Hours

clock hour icon 1.50h course

Membrane Processes is a course designed to introduce water treatment and distribution operators to the operation, uses and types of membrane processes including reverse osmosis, nanofiltration and electrodialysis reversal.

4.7 7 Reviews
$20

NJ Disinfection - 2 Hours

clock hour icon 2h course

Disinfection is a course that focuses on the critical role that pathogen inactivation plays in the surface water treatment process and how necessary it is in producing safe drinking water that meets US EPA standards.

4.5 10 Reviews
$20

NJ Basic Electrical Concepts for Water Operators - 2 Hours

clock hour icon 2h course

Basic Electrical Concepts for Water Operators is a course that covers the fundamental electrical principles that water operators need in their day-to-day operations.

4.5 11 Reviews
$20

NJ Advanced Oxidation & UV Disinfection - 1.5 Hours

clock hour icon 1.50h course

Advanced Oxidation and UV Disinfection is a course designed to introduce water treatment and distribution operators to the operation, uses and types of advanced oxidation and UV processes including ozonation and ultraviolet treatment.

4.3 3 Reviews
$19

NJ Fluid Mechanics

clock hour icon 1h course

This course explains how fluids behave, especially under pressure and in motion. This lesson is divided into two major parts. The first concerns fluids at rest and describes the properties fluids have when they are standing still. The second half treats the subject of fluids in motion.

What are the CE requirements for New Jersey water operators?

The number of TCHs required every three years for each license is as follows:

  • C-3, C-4, N-3, N-4, S-3, S-4, T-3, T-4, W-3, W-4: 36 hours (maximum of 12 hours will be accepted in Safety related training)
  • C-1, C-2, N-1, N-2, S-1, S-2, T-1, T-2, W-1, W-2, CN, NN, NS: 18 hours (maximum of 6 hours will be accepted in Safety related training)
  • VSWS: 12 hours (maximum of 4 hours will be accepted in Safety related training)

 

Courses approved by the Department of Environmental Protection.

State Of New Jersey Water Operator License Renewal Deadlines

  • A New Jersey Water and Wastewater Operator license renewal must be completed by September 30 every year.