This package is intended to meet the renewal requirements for South Carolina Wastewater Operators. This package includes the following courses:
- Maintaining Wastewater Equipment - 5 hours
- Electrical Safety (NFPA 70E 2024) - 6 hours
- Fluid Mechanics - 1 hour
Approved By: Division of Unregulated Administration Bureau Commission Office
- Fluid Mechanics
- Fluid Mechanics [11 Activities]
- 01. Definition of a Fluid
- 02. Fluids Distribute Forces
- 03. Definition of Pressure
- 04. Measuring Pressure
- 05. Sources of Fluid Pressure
- 06. Gauge Verses Absolute Pressure
- 07. Liquid Seeks Its Own Level
- 08. Velocity Head Verses Static Pressure
- View Additional Activities
- 09. The Bernoulli Effect and Venturi Applications
- 10. Friction Head
- 11. The Siphon
- Fluid Mechanics [11 Activities]
- Electrical Safety (NFPA 70E 2024)
- Electrical Safety (NFPA 70E 2024) Part 1 [25 Activities]
- 01. Article 90: Sections 90.1, 90.2, 90.3
- 02. Article 90: Sections 90.4, 90.5, 90.6
- 03. Article 100 Definitions
- 04. Article 105, Application of Safety-Related Work Practices and Procedures
- 05. Article 110, General Requirements for Electrical Safety-Related Work Practices
- 06. Section 110.3, Electrical Safety Program.
- 07. Section 110.4, Training Requirements.
- 08. Section 110.5 Host and Contract Employers Responsibilities.
- View Additional Activities
- 09. Section 110.6, Test Instruments and Equipment.
- 10. Section 110.7(A)&(B), Portable Cord- and-Plug-Connected Electric Equipment.
- 11. Section 110.7(C)-(F), Portable Cord- and-Plug-Connected Electric Equipment.
- 12. Section 110.8, Ground-Fault Circuit-Interrupter (GFCI) Protection.
- 13. Sections 110.8, Ground-Fault Circuit-Interrupter (GFCI) Protection. 110.9 Overcurrent Protection Modification. 110.10?Equipment Use.
- 14. Article 120, Establishing an Electrically Safe Work Condition
- 15. Section 120.2, Lockout/Tagout Program.
- 16. Section 120.3, Lockout/Tagout Principles.
- 17. Section 120.4, Lockout/Tagout Equipment.
- 18. Section 120.5?Lockout/Tagout Procedures PART-I.
- 19. Section 120.5 Lockout/Tagout Procedures PART-II.
- 20. Section 120.6, Process for Establishing and Verifying an Electrically Safe Work Condition.
- 21. Article 130: Work Involving Electrical Hazards
- 22. Section 130.5, Arc Flash Risk Assessment.
- 23. Section 130.7(C)(1) through (C)(8),?Personal and Other Protective Equipment.
- 24. Section 130.7(C)(9) through (C)(15),?Personal and Other Protective Equipment.
- 25. Section 130.7(C). Personal Protective Equipment (Tables).
- Electrical Safety (NFPA 70E 2024) Part 2 [15 Activities]
- 01. Section 130.7(D). Other Protective Equipment.
- 02. Section 130.8(A)-(D). Other Precautions for Personnel Activities.
- 03. Section 130.8(E) (N). Other Precautions for Personnel Activities.
- 04. Section 130.8(O). Alerting Techniques.
- 05. Section 130.9, Work Within the Limited Approach Boundary or Arc Flash Boundary of Overhead Lines
- 06. CHAPTER 2, SAFETY-RELATED MAINTENANCE REQUIREMENTS.
- 07. Article 205, General (Requirements)
- 08. Article 210, Substations, Switchgear Assemblies, Switchboards, Panelboards, Motor Control Centers, and Disconnect Switches
- View Additional Activities
- 09. Article 215, Premises Wiring
- 10 Safety Considerations
- 11. Hand-Cleaned Bar Screens
- 12. Mechanically Cleaned Bar Screens
- 13. Grinders
- 14. Rotating Drum Comminutors
- 15. Stationary Screen Comminutors
- 16. Barminutors
- 17. The Nature of Grit
- 18. Hand-Cleaned Grit Chambers
- 19. Maintaining Hand-Cleaned Grit Chambers
- 20. Detritus Tanks
- 21. Maintaining Detritus Tanks
- 22. Chain and Flight Grit Collectors
- 23. Maintaining Chain and Flight Grit Collectors
- 24. Aerated Grit Chambers and Cyclone Separators
- 25. Maintaining Aerated Grit Chambers
- 26. Sedimentation
- 27. Rectangular Clarifiers
- 28. Scum Removal
- 29. Circular Clarifiers
- 30. Sludge Removal
- 31. Laboratory Testing
- 32. Troubleshooting
- 33. Safety Considerations
- 34. Properties of Flowing Liquids
- 35. Flow Measurement Methods, Including Batch Processes
- 36. Flow Measurement in Open Channels
- 37. Measuring Flow from Freely Discharging Pipes
- 38. Methods of Depth Measurement
- 39. Flow Measurement in Completely Filled Pipes
- 40. Methods of Pressure Measurement
- 41. Maintenance of Flow Measurement Devices
- Electrical Safety (NFPA 70E 2024) Part 1 [25 Activities]
- Course Completion
- Mandatory Questionnaire
- South Carolina Fluid Mechanics - Certificate of Achievement (1 of 3)
- South Carolina Electrical Safety (NFPA 70E 2024) - Certificate of Achievement (2 of 3)
- South Carolina Maintaining Wastewater Equipment - Certificate of Achievement (3 of 3)
