AYPOTech.com

Nebraska Water Operator Continuing Education

Water operators in Nebraska who need to complete the necessary amount of continuing education units (CEUs) have found what they are looking for. Our courses are designed to provide the training that will meet the state requirements for renewal of a water operator license and an education that is informative and practical.

Some of our Nebraska courses give you the opportunity to earn IACET CEUs through our parent company American Safety Council. As an IACET Accredited Provider, American Safety Council offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard.

Drinking Water

$25 TOP SELLER

NE Piping Systems: Part 1

clock hour icon 2h course

This course introduces operators to piping systems and familiarizes them with the larger components that make piping systems function, including metallic and nonmetallic piping, tubing, and hoses.

This course is approved for DRINKING WATER OPERATORS only.

$25

NE Piping Systems: Part 2

clock hour icon 2h course

This course dives further into piping systems by discussing the smaller components that make piping systems function, including fittings, common and special valves, strainers, filters, traps, and accessories. Preventative and repair maintenance for these components are also discussed.

This course is approved for DRINKING WATER OPERATORS only.

$25

NE Introduction to Water Technology

clock hour icon 2h course

This course introduces operators to the hydrologic cycle and its effects on the structure and functions of water and wastewater systems. From there, we discuss water collection, treatment, and distribution, as well as the physical, chemical, and biological properties of water.

This course is approved for DRINKING WATER OPERATORS only.

$25

NE Pumps: Part 2

clock hour icon 2h course

This course continues looking at additional pump types, including reciprocating pumps, metering pumps, and special purpose pumps. For each pump type, we will discuss internal parts, construction, and operation. We also discuss sealing devices, including packing and mechanical seals, bearings, lubrication, and installation.

This course is approved for DRINKING WATER OPERATORS only.

$25

NE Pumps: Part 1

clock hour icon 2h course

This course introduces operators to pumping systems, hydraulics, basic pumping terminology, and pump curves. We will also look at a number of pump types, including end-suction centrifugal pumps, propeller pumps, turbine pumps, and rotary pumps. For each pump type, we will discuss internal parts, construction, and operation.

This course is approved for DRINKING WATER OPERATORS only.

$19

NE Fluid Mechanics

clock hour icon 1h course

This course explains how fluids behave, especially under pressure and in motion. This lesson is divided into two major parts. The first concerns fluids at rest and describes the properties fluids have when they are standing still. The second half treats the subject of fluids in motion.

This course is approved for DRINKING WATER OPERATORS only.

Wastewater

$199

20-Hour Package for Wastewater Operators

clock hour icon 20h course

Save with our 20-Hour Package for Wastewater Operators. This package includes the following courses:

  • Wastewater Treatment Processes
  • Maintaining Wastewater Equipment
  • Pumps Part 1
  • Pumps Part 2
$69

NE Electrical Safety (NFPA70E 2021)

clock hour icon 6h course

This course equips electricians and other workers exposed to electrical hazards with knowledge needed to apply safety requirements from the NFPA 70E. We start by detailing the arrangement, scope, and purpose of the document, as well as define common terms. Then, we discuss securing an electrically safe work condition, lockout/tagout, energized work, grounding electrical equipment, arc flash and more. In summary, we clarify NFPA 70E safety practices used in the electrical industry. This course has no prerequisites.

This course is approved for WASTEWATER OPERATORS only.

$59

NE Piping Systems: Part 1

clock hour icon 5h course

This course introduces operators to piping systems and familiarizes them with the larger components that make piping systems function, including metallic and nonmetallic piping, tubing, and hoses.

This course is approved for WASTEWATER OPERATORS only.

$59

NE Wastewater Treatment Processes

clock hour icon 5h course

This course provides an overview of wastewater treatment, including the physical separation of solids, chemical treatment processes, biological processes, and solids treatment and disposal.

This course is approved for WASTEWATER OPERATORS only.

$59

NE Introduction to Water Technology

clock hour icon 5h course

This course introduces operators to the hydrologic cycle and its effects on the structure and functions of water and wastewater systems. From there, we discuss water collection, treatment, and distribution, as well as the physical, chemical, and biological properties of water.

This course is approved for WASTEWATER OPERATORS only.

$59

NE Maintaining Wastewater Equipment

clock hour icon 5h course

This course provides details on a variety of wastewater equipment, including pumping stations, screening equipment, grinding equipment, grit removal systems, sludge and scum collection apparatus, and flow measurement devices. For each piece of equipment, we will cover major parts, start-up, operation, shutdown, maintenance, and safety.

This course is approved for WASTEWATER OPERATORS only.

$59

NE Pumps: Part 1

clock hour icon 5h course

This course introduces operators to pumping systems, hydraulics, basic pumping terminology, and pump curves. We will also look at a number of pump types, including end-suction centrifugal pumps, propeller pumps, turbine pumps, and rotary pumps. For each pump type, we will discuss internal parts, construction, and operation.

This course is approved for WASTEWATER OPERATORS only.

$59

NE Pumps: Part 2

clock hour icon 5h course

This course continues looking at additional pump types, including reciprocating pumps, metering pumps, and special purpose pumps. For each pump type, we will discuss internal parts, construction, and operation. We also discuss sealing devices, including packing and mechanical seals, bearings, lubrication, and installation.

This course is approved for WASTEWATER OPERATORS only.

$59

NE Piping Systems: Part 2

clock hour icon 5h course

This course dives further into piping systems by discussing the smaller components that make piping systems function, including fittings, common and special valves, strainers, filters, traps, and accessories. Preventative and repair maintenance for these components are also discussed.

This course is approved for WASTEWATER OPERATORS only.

$49

NE Valve Maintenance and Piping System Protection

clock hour icon 4h course

Covers maintenance and operation of gate, globe, ball, plug, check, and special-purpose valves. Details actuators and various accessories. Explains valve selection based on application. Describes methods of protecting piping systems. This course has no prerequisites

This course is approved for WASTEWATER OPERATORS only.

$49

NE Pump Installation and Maintenance

clock hour icon 4h course

This course introduces operators to pumping systems, hydraulics, basic pumping terminology, and pump curves. We will also look at a number of pump types, including end-suction centrifugal pumps, propeller pumps, turbine pumps, and rotary pumps. For each pump type, we’ll discuss internal parts, construction, and operation. This course has no prerequisites.

This course is approved for WASTEWATER OPERATORS only.

$19

NE Fluid Mechanics

clock hour icon 1h course

This course explains how fluids behave, especially under pressure and in motion. This lesson is divided into two major parts. The first concerns fluids at rest and describes the properties fluids have when they are standing still. The second half treats the subject of fluids in motion.

This course is approved for WASTEWATER OPERATORS only.

$10

NE Coagulation and Flocculation

clock hour icon 1h course

Coagulation refers to the process of using chemicals that collect contaminants in water, creating larger particles that are easier to remove. Flocculation is the process of mixing these chemicals in the water to ensure higher rate of contact between coagulants and contaminates. In this course, we'll delve into the details of this fascinating water treatment process.

This course is approved for WASTEWATER OPERATORS only.

$10

NE Corrosion Control

clock hour icon 1h course

In our Corrosion Control course you will learn about the effects of corrosion on a water distribution system, the effects of contamination due to corrosion, and corrosion mitigation techniques.

This course is approved for WASTEWATER OPERATORS only.

$10

NE Pipelines

clock hour icon 1h course

In our Pipelines course, students will discover the many important factors of operating, installing or maintaining a water distribution pipeline system.

This course is approved for WASTEWATER OPERATORS only.

$10

NE Pumps and Motors

clock hour icon 1h course

Pumps and Motors is a course that details the types, components of and the proper maintenance steps for water pumps and the motors that drive them.

This course is approved for WASTEWATER OPERATORS only.

What are the continuing education requirements for Nebraska water operators?

DRINKING WATER

Nebraska drinking water operators must complete 10 hours of continuing education every two years in order to renew their license.

The deadline for renewal is December 31st, every odd-numbered year.

Grade V licensees are exempt from the continuing education and renewal requirements.

 

WASTEWATER

Wastewater operators in Nebraska must meet the following requirements in order to renew their license

Courses are accepted by the Nebraska Department of Environment and Energy.

  • Complete 20 hours of continuing education every 2 years.
  • Renewal deadline: January 1st, April 1st, July 1st, or October 1st, every two years.

 

Some of our Nebraska Water courses give you the opportunity to earn IACET CEUs through our parent company American Safety Council. As an IACET Accredited Provider, American Safety Council offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard.