Mississippi 24-Hour Bundle for Water Operators

Operators with more than 9 years of experience must complete 24 hours of CEUs each renewal cycle. A minimum of 12 hours must cover regulatory hours.

This package includes a total of 24 hours:

Regulatory hours included:
- Advanced Oxidation & UV Disinfection - 1 hour
- Disinfection - 2 hours
- Water Distribution Systems - 2 hours
- Water Utility Management - 5 hours
- Pipelines - 2 hours
- Storage Tanks - 2 hours
Non-Regulatory hours included:
- Pumps Part 1 - 5 hours
- Pumps Part 2 - 5 hours

Course Format: Text

Credit Type: Regulatory, Regulatory, Distribution, Distribution, Regulatory, Non-Regulatory

Course ID(s): 1978, 1976, 2195, 2196, 2199, 2200, 2051, 2052

Approved By: Mississippi State Department of Health - Bureau of Public Water Supply

24-Hour Bundle for Water Operators

Advanced Oxidation & UV Disinfection [7 Activities]
- 01. Introduction Video
- 02. Advanced Oxidation & UV Disinfection Introduction Video
- 03. Choosing a treatment process & Ozone disinfection
- 04. Ozone disinfection video
- 05. UV Disinfection Video
- 06. UV Disinfection
- 07. Conclusion video
Disinfection [8 Activities]
- 01. Course Introduction Video
- 02. Disinfection Introduction Video
- 03. What is disinfection?
- 04. Types of Disinfectants Video
- 05. Types of Disinfectants
- 06. Proper Chlorine Dosing Video
- 07. Proper Chlorine Dosing
- 08. Conclusion
Water Distribution Systems [12 Activities]
- 01. Introduction
- 02. Topologies
- 03. Pipeline Operation
- 04. Meters, Valves, and Hydrants
- 05. Pumps and Motors
- 06. Storage Tanks & Facilities
- 07. Fire Protection
- 08. SCADA Systems
- 09. EPA Regulations and Groundwater Rule
- 10. Maintenance
- 11. Potential System Problems
- 12. Distribution System Water Quality Issues
Water Utility Management
- Successful Water Utilities Management: Theories and Planning [10 Activities]
  - 01. Introduction to Water Utility Management
  - 02. Characteristics of Successful Water Utility Management
  - 03. Management Theories
  - 04. Problems Associated with Management: Overview
  - 05. Problems Associated with Management: Planning
  - 06. Problems Associated with Management: Risk Assessment
  - 07. Risk Management
  - 08. Best Practices for Water Utility Management: Overview
  - 09. Best Practices for Water Utility Management: Self-Assessment
  - 10. Best Practices for Water Utility Management: Organizational Culture
- Practical Approaches to Utility Management [7 Activities]
  - 01. Overview (Practical Approaches to Utility Management)
  - 02. Lean Techniques
  - 03. Additional Resources and Tools: Overview
  - 04. Additional Resources and Tools: Effective Utilities Management (EUM)
  - 05. Additional Resources and Tools: Case Studies
  - 06. Continual Improvement Management
  - 07. Reliability
- Workplace Safety: Requirements and Resources [7 Activities]
  - 01. Overview of Workplace Safety
  - 02. Hazardous Materials and Environmental Risks
  - 03. Workplace Hazards
  - 04. Safety Recommendations
  - 05. Safety Requirements
  - 06. Safety Resources
  - 07. Conclusion
Pipelines [12 Activities]
- 01. Introduction
- 02. Pipeline Composition
- 03. Installation
- 04. Joining
- 05. General Operations
- 06. General Regulations, Overview
- 07. Pressure
- 08. Monitoring and Management
- 09. Maintenance
- 10. Safety
- 11. Environmental Concerns
- 12. Conclusion
Storage Tanks [14 Activities]
- 01. An Introduction to Storage Tanks and Their Facilities
- 02. Common Types and Classification
- 03. Sizes and Common Materials
- 04. Storage Tank Components
- 05. Basic Operation
- 06. Water Demand
- 07. Regulations and Standards
- 08. Regulations and Standards: Facility and Tank Construction
- 09. General Maintenance
- 10. Disinfection and Sanitation
- 11. Safety
- 12. Security
- 13. Inspections
- 14. Conclusion
Pumps Part 1 [42 Activities]
- 01. The Development of Pumps
- 02. Pumping Systems
- 03. Water Pumping Systems
- 04. Chemical Pumping Systems
- 05. Waste Pumping Systems
- 06. High-Viscosity Material Pumping Systems
- 07. Solid Pumping Systems
- 08. Pumping Terminology
- 09. Calculating Total Head
- 10. Horsepower Calculations
- 11. Total Energy vs Available NPSH
- 12. Available NPSH vs Required NPSH
- 13. Pump Performance Curves
- 14. Head Capacity Curves
- 15. Curve Families
- 16. Pump Selection
- 17. Centrifugal Pumps
- 18. Pump Part Definitions
- 19. End-Suction Casing Configurations
- 20. Split-Case Centrifugal Pumps
- 21. Double-Volume Pumps
- 22. Impeller Types
- 23. Wear Rings
- 24. Shafts, Bearings, and Sleeves
- 25. Turbine Pumps Overview and Lineshaft Turbines
- 26. Can Turbines
- 27. Submersible Turbines
- 28. Flow Patterns
- 29. Axial-Flow Propeller Pumps
- 30. Mixed-Flow Propeller Pumps
- 31. Special Propeller Pumps and Turbine Pump Construction
- 32. Vertical Turbine Pump Application
- 33. Regenerative Turbine Pumps
- 34. Introduction to Rotary Pumps
- 35. External-Gear Pumps
- 36. Internal-Gear Pumps
- 37. Lobe Pumps
- 38. Screw Pumps
- 39. Vane Pumps
- 40. Rotary Piston Pumps
- 41. Flexible-Members Pumps
- 42. Rotary Pump Installations
Pumps Part 2 [41 Activities]
- 01. Reciprocating Pump Applications
- 02. Reciprocating Pump Parts
- 03. Reciprocating Pump Classifications
- 04. Steam-Driven Pump Operation
- 05. Power Pump Operations
- 06. Horizontal Plunger Pumps
- 07. Vertical Plunger Pumps
- 08. Air-Driven Pump Operations
- 09. Introduction to Metering Pumps
- 10. Metering Pump Classification
- 11. Plunger and Piston Metering Pumps
- 12. Diaphragm Pumps
- 13. Air-Operated Metering Pumps
- 14. Rotary Metering Pumps
- 15. Handling Difficult Materials
- 16. Chemical Pumps
- 17. Special Chemical Pumps
- 18. Magnetic-Drive Pumps
- 19. Canned-Motor Pumps
- 20. Centrifugal Slurry Pumps
- 21. Pulp-Handling Pumps
- 22. Trash and Sewage Pumps
- 23. Diaphragm Pumps
- 24. Reciprocating Slurry Pumps
- 25. Vortex Pumps
- 26. Pump Sealing Requirements
- 27. Stuffing Boxes
- 28. Packing Materials
- 29. Installing Packing
- 30. Mechanical Seals
- 31. Special Seals
- 32. Pump and Sleeve Bearings
- 33. Antifriction and Special Bearings
- 34. Bearing Lubrication
- 35. Bearing Seals
- 36. Pump Installation and Maintenance
- 37. End-Suction Centrifugal Pumps
- 38. Vertical Turbine Pumps
- 39. Rotary Pumps
- 40. Reciprocating Pumps
- 41. Difficult Material Pumps and Other Maintenance Problems

Course Completion

Mandatory Questionnaire
Advanced Oxidation & UV Disinfection - Certificate of Achievement
Disinfection - Certificate of Achievement
Water Distribution Systems - Certificate of Achievement
Water Utility Management - Certificate of Achievement
Pipelines - Certificate of Achievement
Storage Tanks - Certificate of Achievement
Pumps Part 1 - Certificate of Achievement
Pumps Part 2 - Certificate of Achievement