AYPOTech.com

Utah Water Operator Continuing Education

Water operators in Utah who are attempting to acquire the required amount of continuing education units (CEUs) to renew their license have found the right place.

AYPO Tech is approved by the Utah Department of Envirnomental Quality Division of Drinking Water and Division of Water Quality with courses for water operators that are educational while also being filled with critical information that is useful on a daily basis.

Drinking Water

$59 TOP SELLER

UT Water Utility Management

clock hour icon 5h course

This course is intended to enhance the student's ability to apply enlightened and effective management techniques, prepare and implement a risk management plan; identify workplace hazards; respond to workplace injuries and illnesses, and to foster a culture of safety able to identify and mitigate hazards at water/wastewater treatment plants.

This course is approved for DRINKING WATER OPERATORS only.

$59

UT Pumps: Part 2

clock hour icon 5h course

This course continues looking at additional pump types, including reciprocating pumps, metering pumps, and special purpose pumps. For each pump type, we will discuss internal parts, construction, and operation. We also discuss sealing devices, including packing and mechanical seals, bearings, lubrication, and installation.

This course is approved for DRINKING WATER OPERATORS only.

$49

UT Electrical Safety (NFPA 70E 2021)

clock hour icon 4h course

This course equips electricians and other workers exposed to electrical hazards with knowledge needed to apply safety requirements from the NFPA 70E. We start by detailing the arrangement, scope, and purpose of the document, as well as define common terms. Then, we discuss securing an electrically safe work condition, lockout/tagout, energized work, grounding electrical equipment, arc flash and more. In summary, we clarify NFPA 70E safety practices used in the electrical industry. This course has no prerequisites.

This course is approved for DRINKING WATER OPERATORS only.

$25

UT Surface Water Treatment Plant Operations - 1.5 Hours

clock hour icon 1.50h course

This course will provide an overview of surface water treatment plant operations. You will learn about surface water treatment regulations, and the basics of treatment processes, coagulation and flocculation, filtration, disinfection, corrosion control, and much more.

This course is approved for DRINKING WATER OPERATORS only.

5.0 3 Reviews
$25

UT Water Distribution System Operation Overview - 1.5 Hours

clock hour icon 1.50h course

This course will provide an overview of water distribution system operation. You will learn the basics of the entire water distribution system as we cover topics such as pipeline operations, pumps and motors, meters, valves and hydrants, SCADA systems, and much more.

This course is approved for DRINKING WATER OPERATORS only.

4.4 15 Reviews
$19

UT Source Water Issues and PreTreatment - 1 Hour

clock hour icon 1h course

Whether your water comes from a lake, stream or groundwater basin, understanding your source is the first step in providing safe drinking water. This course outlines the various source water types and the important role they play.

This course is approved for DRINKING WATER OPERATORS only.

4.0 2 Reviews
$19

UT Pipelines - 1 Hour

clock hour icon 1h course

In our Pipelines course, students will discover the many important factors of operating, installing or maintaining a water distribution pipeline system.

This course is approved for DRINKING WATER OPERATORS only.

4.6 11 Reviews
$19

UT Meters Valves and Hydrants - 1 Hour

clock hour icon 1h course

Discover how meters, valves and hydrants play vital roles in the delivery of safe drinking water to the public.

This course is approved for DRINKING WATER OPERATORS only.

4.5 11 Reviews
$19

UT Pumps and Motors - 1 Hour

clock hour icon 1h course

Pumps and Motors is a course that details the types, components of and the proper maintenance steps for water pumps and the motors that drive them.

This course is approved for DRINKING WATER OPERATORS only.

4.3 10 Reviews
$19

UT Groundwater Wells - 1 Hour

clock hour icon 1h course

Our Groundwater Wells course is designed to introduce and cover the basic components and operation of groundwater wells along with the fundamentals of maintaining safe drinking water from this types of water source.

This course is approved for DRINKING WATER OPERATORS only.

4.7 15 Reviews
$19

UT Distribution System Water Quality Issues - 1 Hour

clock hour icon 1h course

AYPO's Distribution System Water Quality Issues course will introduce to water operators the many issues that must be present in order to achieve and maintain a safe and high-quality water supply in a distribution system.

This course is approved for DRINKING WATER OPERATORS only.

4.0 11 Reviews
$19

UT Corrosion Control - 1 Hour

clock hour icon 1h course

In our Corrosion Control course you will learn about the effects of corrosion on a water distribution system, the effects of contamination due to corrosion, and corrosion mitigation techniques.

This course is approved for DRINKING WATER OPERATORS only.

4.8 4 Reviews
$19

UT Coagulation and Flocculation - 1 Hour

clock hour icon 1h course

Coagulation refers to the process of using chemicals that collect contaminants in water, creating larger particles that are easier to remove. Flocculation is the process of mixing these chemicals in the water to ensure higher rate of contact between coagulants and contaminates. In this course, we'll delve into the details of this fascinating water treatment process.

This course is approved for DRINKING WATER OPERATORS only.

Wastewater

$249

30-Hour Package for Utah Wastewater Grades III and IV

clock hour icon 30h course

Save with our 30-Hour Package for Grade III and IV Wastewater Operators. This package includes the following courses:

  • Wastewater Treatment Processes
  • Maintaining Wastewater Equipment
  • Pumps Part 1
  • Pumps Part 2
  • Piping Systems Part 1
  • Piping Systems Part 2
$199

20-Hour Package for Utah Wastewater Grades I and II

clock hour icon 20h course

Save with our 20-Hour Package for Grade I and II Wastewater Operators. This package includes the following courses:

  • Wastewater Treatment Processes
  • Maintaining Wastewater Equipment
  • Pumps Part 1
  • Pumps Part 2
$59

UT Wastewater Treatment Processes

clock hour icon 5h course

This course provides an overview of wastewater treatment, including the physical separation of solids, chemical treatment processes, biological processes, and solids treatment and disposal.

This class is approved for WASTEWATER OPERATORS only.

$59

UT Introduction to Water Technology

clock hour icon 5h course

This course introduces operators to the hydrologic cycle and its effects on the structure and functions of water and wastewater systems. From there, we discuss water collection, treatment, and distribution, as well as the physical, chemical, and biological properties of water.

This class is approved for WASTEWATER OPERATORS only.

$59

UT Pumps: Part 2

clock hour icon 5h course

This course continues looking at additional pump types, including reciprocating pumps, metering pumps, and special purpose pumps. For each pump type, we will discuss internal parts, construction, and operation. We also discuss sealing devices, including packing and mechanical seals, bearings, lubrication, and installation.

This class is approved for WASTEWATER OPERATORS only.

$59

UT Pumps: Part 1

clock hour icon 5h course

This course introduces operators to pumping systems, hydraulics, basic pumping terminology, and pump curves. We will also look at a number of pump types, including end-suction centrifugal pumps, propeller pumps, turbine pumps, and rotary pumps. For each pump type, we will discuss internal parts, construction, and operation.

This class is approved for WASTEWATER OPERATORS only.

$59

UT Piping Systems: Part 2

clock hour icon 5h course

This course dives further into piping systems by discussing the smaller components that make piping systems function, including fittings, common and special valves, strainers, filters, traps, and accessories. Preventative and repair maintenance for these components are also discussed.

This class is approved for WASTEWATER OPERATORS only.

$59

UT Piping Systems: Part 1

clock hour icon 5h course

This course introduces operators to piping systems and familiarizes them with the larger components that make piping systems function, including metallic and nonmetallic piping, tubing, and hoses.

This class is approved for WASTEWATER OPERATORS only.

$59

UT Maintaining Wastewater Equipment

clock hour icon 5h course

This course provides details on a variety of wastewater equipment, including pumping stations, screening equipment, grinding equipment, grit removal systems, sludge and scum collection apparatus, and flow measurement devices. For each piece of equipment, we will cover major parts, start-up, operation, shutdown, maintenance, and safety.

This class is approved for WASTEWATER OPERATORS only.

$19

UT Fluid Mechanics

clock hour icon 1h course

This course explains how fluids behave, especially under pressure and in motion. This lesson is divided into two major parts. The first concerns fluids at rest and describes the properties fluids have when they are standing still. The second half treats the subject of fluids in motion.

This class is approved for WASTEWATER OPERATORS only.

What are the CE requirements for certified Utah water operators?

DRINKING WATER

Certified water operators in Utah are required to complete approved water industry related CE to renew their certificates every 3 years:

  • Small System = 20 Credit Hours (2 CEUs)
  • Grade 1 = 20 Credit Hours (2 CEUs)
  • Grade 2 = 20 Credit Hours (2 CEUs)
  • Grade 3 = 30 Credit Hours (3 CEUs)
  • Grade 4 = 30 Credit Hours (3 CEUs)

 

License Renewal Deadline: Dec 31st, every three years.

Our courses are approved by the Utah Division of Drinking Water and will meet your mandatory training needs.

 

WASTEWATER

 

Utah Wastewater Operators are required to complete 20-30 continuing education hours (2-3 CEUs) for renewal every three years, depending on license type.

License Renewal Deadline: Dec 31st, every three years.

  • Grades I and II = 20 hours (2 CEUs)
  • Grades III and IV = 30 hours (3 CEUs)

 

Courses are approved by the Approved by the Department of Environmental Quality, Division of Water Quality.

Agency Requirements for licensure